Yesterday I started mounting my first pair of doors. The issue here is that I have to get the doors to line up to each other, and even a small variance will show. Last evening I was able to get them mounted and close, but they weren’t quite right.
The door on the left was slightly higher than the door on the right. I was getting tired so I knocked off for the evening.
This evening, I went and sat down and examined the situation. Turned out I needed to make the hinge mortise on the lower left a tiny bit deeper to even out the gap on the left. After I did that, the doors were much closer but still not right. Another close look and I saw I needed to make the top right hinge mortise a tiny bit deeper. Once I did that, they lined up perfectly and the gap between them is nice and even.
Only three more pairs to go…